Concrete Sealing Perth – WA’s Most Experienced and Effective Team

Why Concrete Needs Sealing in Perth

Concrete looks clean the day it’s laid, but it starts discolouring almost as soon as it’s used. As a porous surface, concrete absorbs oil, coffee, wine and everyday grime, and once a stain sinks below the surface, it’s far harder to lift than one sitting on top. Perth’s harsh summer sun also accelerates fading and surface wear on exposed concrete and exposed aggregate driveways.

Sealing solves this at the source. A quality concrete sealer creates a repellent layer across the top couple of millimetres of the surface, so spills sit on top long enough to be wiped up instead of soaking in. This applies to all concrete types, including standard concrete, exposed aggregate and popular liquid limestone concrete finishes.

Our Concrete Sealing Process

A concrete sealer only bonds properly to a clean surface, so we never skip straight to sealing. Here’s how we approach every concrete sealing job in Perth:

1. Inspect and assess: We check your concrete type, whether it’s standard concrete, exposed aggregate or a liquid limestone finish, and assess its current condition to choose the right sealant.

2. High pressure clean: We remove built up dirt, oil and grime with a thorough clean, since sealing over a dirty surface traps that grime underneath the coating.

3. Dry and prep: The concrete needs to be fully dry before sealing, so we allow adequate drying time depending on weather conditions.

4. Apply the sealant: We apply a sealant matched to your surface and how the area is used, whether it’s a driveway, patio, entertaining area or pool surround.

5. Cure and protect: Once cured, your concrete is protected against oil, discolouration and general wear, and day to day maintenance is as simple as a broom, hose or home pressure cleaner.

We recommend resealing every few years depending on foot and vehicle traffic, to keep your concrete protected long term.